Create an intimate space for the gathering of family and friends. Customize this pergola with lights, climbing flowers, or conversation seating. The possibilities are endless!
DIY Wood-Look Aluminum Patio Roof is made from durable aluminum, which makes them low maintenance and easy to install. Shipped only in Florida, USA. For custom orders call (305) 454-3721
- Low Maintenance and backed by a Lifetime Limited Warranty
- Easy to Install Kits, comprehensive instructions included, all you need are basic tools.
- Constructed to emulate a wood patio cover, large post, and strong beams with a cedar woodgrain finish.
- The Newport solid patio cover is a shade structure that provides complete protection from sun, rain, and snow, creating year-round usable space
How to Measure
Projection: Measure the distance you want to be covered from your house to the end of the covered area(where the panel end) not including Rafter Tails on the Front Fascia( in case of the Wood-Style Roof). The Beam Posts will generally be set back about one (1) foot from the end of the covered area, so, the roof will be with 1-foot overhang on the front.
Length: Measure the distance you want to be covered along with your house. The wall header will be connected in this Area.
Note: Our kit includes Post at 10 feet long , if you need a different size you must call our company for custom sizes.
work so you can obtain a permit. The extra weight added by the structure may be too much for your eave to hold.
Wood-Look Aluminum Roof:
Rafter Spacing on Center: Measure from the outside of one rafter to the inside of the next rafter to get your spacing on center; usually rafters are spaced every 16 or 24 inches.
Rafter Size: The rafters will be cut it into 1 foot long in the top part. Pieces come in (3) feet and must be divided into two parts to have 2 rafters for each piece.
Note: When attaching to the fascia you will need to place an internal connector from the fascia board to the rafter. This connector is commonly known as 2×6 internal and is included in the kit, depending on the number of rafters.
Engineering and Codes
Will the Aluminum Roof meet my local codes?
Most of our Aluminum Patio Cover Kits are backed by the International Building Code, the most widely accepted engineering standard in the United States. But we ever recommend checking your needs with the local building department if you are planning to do a job by code.
Do I need Engineering Plans?
Yes. Getting a permit is extremely recommended if you are planning to do a Roof in your patio. We are not liable if you decide to do it in anyways, so we will recommend going to the building authority and get all the information for your job.
If you’re getting a permit the local building dept. will use them to reference that your cover meets your local requirements. In that case, you must call our company for suggestions, and will assist you with any needs.
NOA: (Notice of Acceptance) In many counties will be required to have an NOA or product approval letter from the product. You can request an NOA from our building department or you can download it on our website and send it to the building authorities in your area.